鋁合金升降機http://www.flyspray.cn/是一種應用范圍十分廣泛的升降設備，受到人們的青睞。在使用鋁合金升降機時，有時會出現波動的現象，下面濟南榮凱升降機械的專家給大家詳細分析一下臺面波動怎么辦？
1、鋁合金升降機臺面波動不穩定，很大部分原因是油缸造成的，油缸封閉性不均勻或者油缸內柱不均勻均會導致臺面出現波動不穩定，仔細檢查油缸是否工作正常。
Aluminum alloy elevator table unstable. Much of the reason is caused by the oil cylinder, cylinder seal is not uniform or cylinder column uneven will bring about mesa appear unstable, carefully check the cylinder is working properly.
2、鋁合金升降機油管內部有阻礙物等，導致液壓油輸送不均勻導致油缸不同步，建議安裝新的油管。
The internal Aluminum Alloy lift tubing obstructions, causing hydraulic oil transportation due to the uneven cylinder synchronization, recommended to install the new tubing.
3、檢查鋁合金升降機http://www.flyspray.cn/是否超載，提醒大家按照規定載重進行使用，不要超載。
Check whether the aluminum alloy lift overload, to remind everyone to use the provisions in accordance with the provisions of the load, do not overload.
